
 CYBER-TECHNICS Presents:                   C Y B E R - P A G E            
                                          Version 3.0 - 12/4/1994          
   By: David Spiller                         (C)opyright 1994              


 BBS Support For: 

  Wildcat! BBS            PCBoard BBS            Quick BBS      Remote Access
  Spitfile BBS            GAP BBS                RBBS-PC BBS    WWIV
  Telegard                Force!                 TriBBS         VBBS
  Phoenix                 Genesis                SuperBBS

 Warranty 

 This product is provided "as is" without warranty of any kind. The entire
 risk as to the results and performance of the program is assumed by you.
 Furthermore, I, the author, do not warrant, guarantee, or make any represent-
 tions regarding the use of, or the results of the use of the program, and you
 rely on the program and results solely at your own risk. I, the author, cannot
 accept responsibility for system damage, loss of profit, or any other special,
 incidental, or consequential damages resulting from the use or inability to
 use this product.

 Licensing 

  Upon registering you are granted a licensed registration number, which gives
  you certain limited rights to use this door.

  You are granted rights to use this door on a single BBS system. It may be
  used on several CPU's in a networking or multi-tasking environment where the
  BBS system has more than one node.

  You do not become an owner of this or any other CYBER-TECHNICS product.
  CYBER-TECHNICS retains ALL RIGHTS to all the software, copies of the software
  and related materials. Also, upon registering, you agree to use reasonable
  efforts to protect the registered door number from unauthorized use,
  reproduction, and distribution. All rights not specifically granted in
  this license are reserved by CYBER-TECHNICS Software.

  Failure to comply with this license can and will result in suspension
  and removal of the license without refund.

 (C)opyright 

  This CYBER-TECHNICS Software Door is distributed under the SHAREWARE concept.
  Under this concept, you may use the SHAREWARE (unregistered evaluation)
  version for a reasonable period of time, which is thirty days.

  Registration will also remove any "nag" screens and/or delays.

 PAGE 1 


 Door Operation 



 Running Locally 

  To run locally, just run CPAGE.EXE.  No other parameters are needed. The
  door will then execute in local mode.

  NOTE: Only run the door from the DOS command line in local mode. Never use
	the CPAGE.EXE in a batch file called by the Bulletin Board System
	without the proper drop file setup.  This mode is merely here to
	allow you a quick look at the door before installation to your BBS.

 Running On BBS For Evaluation 

  This door is not crippled in any way.  However, the unregistered version
  does use delays and "nag" screens as reminders the door is not registered.

  See SETUP.TXT for specific instructions on running this door.

  Please take the time to evaluate this door, then register it.

 Running as A Registered Door 

  Running as a registered door requires a registration number. See below
  for registration information.  The registered version of this door does
  not display "nag" screens or have built-in delays.  Upon registering, you
  will receive a registration number which will not expire.

 PAGE 2 


 Registering 

  CYBER-TECHNICS accepts Money Orders & Checks in U.S. currency and will ship
  either U.S. SnailMail, netmail pickup, crash netmail, or you may call and
  get your number via The Circuit Board at (912) 598-7587.

  Print-out or copy the contents of the ORDERFRM.TXT file provided in this
  archive. Fill it out with the requested information and send the appropriate
  payment to the address on the form or at the end of this documentation.
  C.O.D. is not accepted due to the small price of this software.  Credit
  Cards are not yet accepted, but may in the future if there is enough 
  support for this product.


 Receiving Your Order 

  All orders are shipped U.S. Mail unless you specify otherwise. Registration
  numbers may be downloaded from The Circuit Board BBS. The number will be
  attached to a private message to you with directions for downloading.  I will
  also send registration numbers via Netmail file attachment when available.
  
  I assure you that shipment of the registration number will be sent promptly.
  If you have any problems with my door, I will try to solve your problem as
  best as I can and as quick as possible.

  Support can be obtained by calling The Circuit Board BBS, or by mail 
  or Netmail.  Please see the last page of this document for phone
  numbers and mailing address.

 PAGE 3 


 Features 

  * Supports Wildcat 4.x 3.x 2.X, QuickBBS, PCBoard 14.X, Gap, Spitfire
    RBBS-PC, RemoteAccess, WWIV, Telegard, Synchronet, TriBBS, VBBS, and
    possibly more.

  * Setup Program to create configuration file.

  * ANSI and ASCII.

  * Activity Log listing name, date, and reason.

  * BBS and Voice Support (Registered).  Bug reports and fixes welcomed.

  * Sound Blaster Paging!

 PAGE 4 


      Command Line       


  COMMAND Line:  CPAGE  CPAGER  CPCONFIG  INSTALL  PAGE  PLANY

  This door has several command-line commands listed above.  The description
  for usage is below.

  CPCONFIG    - Run's the door games Setup program.

  CPAGE       - Used executing the door in local mode. For use from the DOS
		  prompt only.  Never CPAGE in a BBS batch file.

  CPAGER      - Batch file example for BBS usage.  Change as needed.

  INSTALL     - Batch file to install the door into its own directory and
		  call CPCONFIG to set up the door.

  PAGE        - Batch file called by program in sound mode.  This batch file
		  calls PLANY to play your choice of supported sound files
		  through a SoundBlaster.  A list of supported sound files can
		  be found in PLANY.DOC included in this archive.

  PLANY       - Program to play supported sound files through a SoundBlaster.
		  Instructions for usage can be found in PLANY.DOC.

  Please note that all rights are reserved by and to the author(s) of
  PLANY.EXE, and this document in no way subrogates those rights.

 Notes Of Interest & Problem Solvers 


  This door DOES NOT require any runtime modules to run. It will run as-is
  without any aid from outside utilities.

  If your TIMES.DAT file is erased or mangled, you will have to create a new
  file by that name with ONE blank line in it for the program to operate
  correctly.

 Technical Support 

  If you have problems with this door, you can contact me, David Spiller, via
  The Circuit Board BBS, or call me voice at the number below.

			   The Circuit Board Support BBS
		 Node #1 (912)598-7587 (USRobotics 14.4 Sportster)
				Fido 1:3626/4

				      -or-

			 Netmail to Simply PC BBS, 1:3626/2
			 
				      -or-

		Internet Email to:  david_spiller@tybeelytes.mhv.net


 Ordering Information 

  Please see the file ORDERFRM.TXT file in this package for ordering
  information.

 Distribution 

  You are free, and encouraged, to distribute this SHAREWARE version of this
  CYBER-TECHNICS door, provided that all files contained in the original
  archive are distributed in their original, unmodified state.

	      Registration numbers MAY NOT be distributed in any form.

 PAGE 6 


 Acknowledgements 

	      Rusty Johnson - JNS Software
	      Bill Neisius - PLANY
	      Warren Williams
	      Wildcat BBS System - Mustang Software
	      GAP Communications  - The GAP Development Company
	      PCBoard - Clark Development Company, Inc.
	      Spitfire - Mike Woltz, Buffalo Creek Software
	      QuickBBS - The QuickBBS Group, Inc
	      Steve White - Writing the dox,  and Beta Testing

	      And a host of others who know who they are and that they're
	      appreciated...

